> ## Documentation Index
> Fetch the complete documentation index at: https://docs.open.cx/llms.txt
> Use this file to discover all available pages before exploring further.

# Outbound senders, mailboxes and sending domains

> Set up the mailboxes and sending domains that sequence emails go out from: senders and signatures, warm-up and health, sending limits, buying or connecting domains.

Sequence emails go out from mailboxes on separate sending domains, spread across several addresses so each one sends a small volume. Use this page to set up those mailboxes before you add an email step to a [sequence](https://docs.open.cx/outbound/introduction.md).

> [!NOTE]
>
> **Outbound → Senders** in your [OpenCX dashboard](https://platform.open.cx/outbound/senders). Viewing needs the **Email sending fleet** or **Outbound sequences** read permission. Adding mailboxes, buying or connecting domains, and changing senders or limits needs **Email sending fleet** write.

> [!NOTE]
>
> These sending domains are not the domains under [Settings → Domains](https://docs.open.cx/email/sending-domains.md). Those verify the domain your support replies and workflow emails come from. The two lists are separate: a domain set up in one can't be used in the other, and sequence email steps can only send from mailboxes on this page.

## Add mailboxes

A mailbox needs a sending domain. If you have none yet, the dialog offers **Buy a domain** and **Use your own domain** first; see [Get a sending domain](#get-a-sending-domain).

**1. Open the dialog**

On **Outbound → Senders**, click **Add mailboxes**.

**2. Pick who they send as**

Under **Sender**, pick an existing sender or **New sender…**, then enter a **First name**, an optional **Last name** and a **Signature**.

**3. Pick the addresses**

Under **Addresses**, tick suggested names or type your own on each domain. Names use lowercase letters and digits, with dots inside.

**4. Create them**

Click **Create mailboxes**. New mailboxes get ready in the background.

| Limit | Value |
| - | - |
| Mailboxes per domain | 5. Add another domain to keep growing. |
| Mailboxes per request | 250 |
| Reusing an address | Not possible. An address can be created once; after you delete it, it can't be created again. |

## Senders and signatures

A sender is the name and signature an email goes out with. Several mailboxes can share one sender. To change it, use the **Sender** menu on a mailbox row: pick another sender, click the pen next to a sender to edit it, or choose **New sender…**. Editing a sender changes every mailbox that uses it, and the dialog tells you how many.

In a sequence email step, the `{{signature}}` variable is filled from the sending mailbox's sender, so each mailbox signs with its own signature.

## Mailbox status

| Status | Meaning |
| - | - |
| **Setting up** | OpenCX is preparing the mailbox, usually for a few minutes. It waits for its domain if the domain is still being set up. |
| **Ready** | Sequences can send from it. |
| **Paused** | Sending from it is on hold. Replies to it are still received. |
| **Removing…** | It is being deleted. |

You can pick a mailbox in a sequence while it is still **Setting up**. It sends nothing until it is **Ready**.

If a bought domain can't be registered, its mailboxes are struck through with **Its domain couldn't be registered**.

## Warm-up and mailbox health

Every mailbox warms up from the moment it is ready: it sends quiet test emails that build its reputation, so real emails land in the inbox. Warm-up runs alongside your sequences and can't be turned off. Test emails that arrive in the mailbox don't show up in your OpenCX inbox.

Hover the pulse icon next to a mailbox's status, or next to a mailbox in a sequence's **Settings**, to see its numbers. The icon appears once there is something to show, and the figures refresh about once an hour.

| Figure | What it shows |
| - | - |
| **Status** | Whether warm-up is **Running**, **Not running** or **Paused**. |
| **Landing in inbox** | The share of warm-up test emails that reached the inbox. |
| **Landing in spam** | The share of warm-up test emails that landed in spam. |
| **Score** | An overall warm-up score out of 100. |
| **Test emails sent** | How many warm-up emails the mailbox has sent. |
| **Warming since** | When warm-up started. |
| **Bounced** | Under **Your campaigns**: the share of the mailbox's last 30 sequence emails that hard-bounced. Hidden until at least 10 have gone out. |

These are numbers, not a verdict. OpenCX doesn't stop or pause a mailbox based on them, and they don't guarantee where any single email lands. A missing figure shows as a dash, never as zero.

## Sending limits

Each mailbox has a **Standard limits** switch, on by default. It applies across every sequence that uses the mailbox.

| | Standard limits on | Standard limits off |
| - | - | - |
| Spacing | About 9 to 14 minutes between emails from one mailbox | Up to 3 attempts every 30 seconds |
| Daily allowance | Starts at 3 a day and grows by 1 for each earlier day the mailbox actually sent, up to 30 a day. Idle days don't count, and the day resets at midnight UTC. | No daily cap |
| When the receiving server asks it to slow down | The mailbox pauses for one hour | The person is retried after 30 seconds |

Rejected attempts count toward the pace in both modes. A sign-in or account block pauses the mailbox for six hours either way. Because of these limits, adding mailboxes to a sequence gets through the list faster; it doesn't message anyone more often. For more on the switch, see [Sequence sender settings](https://docs.open.cx/email/sequence-senders.md).

## Delete a mailbox

Use the delete action on the mailbox's row, then confirm with **Delete mailbox**. The address is retired for good and can't be recreated. Sequences stop sending from it right away: people waiting on it move to the sequence's other mailboxes, and a sequence left with no mailbox sends no email until you pick one. Replies that arrive while it is being removed are still received.

## Get a sending domain

Open **Domains** on the Senders page, or go to [Outbound → Senders → Domains](https://platform.open.cx/outbound/senders/domains). Your workspace can hold 10 sending domains by default; bought and connected domains count together. At the limit, the buttons show **You've reached your domain limit — contact us to raise it**.

> [tab] Buy domains
>
> A separate domain keeps campaign email away from your support email's reputation.
>
> 1. Click **Buy domains** and enter your **Brand name**. OpenCX suggests lookalike `.com` and `.org` names. Your own brand domain is listed but can't be bought.
> 2. Pick names. Each available name shows its yearly price; taken names show **Taken**. You can buy up to 10 at once.
> 3. Optionally fill in **Where should visitors land?**, your website address. Anyone who opens the sending domain is sent there; a domain that leads nowhere looks like spam infrastructure.
> 4. Click **Buy**.
>
> A new domain shows **Setting up** while it is registered and its DNS spreads. That usually takes a few minutes but can take up to 24 hours. OpenCX sets up its DNS records for you, and you can add mailboxes before it finishes. Mailboxes are not created automatically. If a name can't be registered, the row offers **Try another name** and **Remove**.

> [tab] Use your own domain
>
> Sending through your own domain can affect its reputation, and you need access to its DNS settings.
>
> 1. Click **Use your own domain** and enter a domain or subdomain, such as `mail.example.com`.
> 2. If the domain already handles email, OpenCX recommends a subdomain so your current email keeps working, and offers one. Existing mailboxes can't be combined or imported. To use the domain anyway, tick **I understand this will replace the current email setup on this domain**; this interrupts incoming and outgoing email on it.
> 3. Add the records shown at your DNS provider. Set the TTL to Auto/default or 300 seconds, and if your provider offers proxying for A records, set them to DNS only. A CNAME on the same name can't coexist with these records.
> 4. OpenCX checks the records automatically, even after you close the dialog. Each record shows **Record matches**, **Different value found**, **Record not found yet** or **Waiting for the next check**. The domain goes live once every record matches.
>
> For a connected domain, renewal, redirect and DNS stay with you; the table shows **Managed by you**.

## Renewal and auto-renew

The Domains table shows each bought domain's **Renewal** date, **Redirect** and **Auto-renew** switch. **Auto-renew** is on by default. Turn it off and the domain keeps working until its renewal date, which then reads **Ends** instead of **Renews**; turn it back on before that date to keep it. You can change the redirect for each domain at any time.

## Troubleshooting

| Symptom | Likely cause | Fix |
| - | - | - |
| **Add mailboxes** says **All your domains are full** | Every domain holds 5 mailboxes | Buy or connect another domain. |
| **Buy domains** and **Use your own domain** are disabled | You reached the domain limit, or you lack **Email sending fleet** write | Contact OpenCX to raise the limit, or ask an admin. |
| A connected domain stays in **Setting up** | A record is missing or has a different value | Compare each record with **Value to use** and correct it at your DNS provider. |
| None of the above | | Contact OpenCX support. |

***

## Related Documentation

> [card] [Create a sequence](https://docs.open.cx/outbound/create-a-sequence.md)
>
> Pick mailboxes in a sequence's settings.

> [card] [Sequence sender settings](https://docs.open.cx/email/sequence-senders.md)
>
> The standard limits switch in detail.

> [card] [Support sending domains](https://docs.open.cx/email/sending-domains.md)
>
> Settings → Domains, for support email.

> [card] [Email senders API](https://docs.open.cx/api-reference/sequences/list-email-senders.md)
>
> Mailbox eligibility and health from code.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.